Rack Mounted Energy Storage Lithium Battery
Rack Mounted Energy Storage Lithium Battery is similar to a micro-energy storage power station, which is not affected by the city's power supply pressure. During off-peak times, the battery pack in the home's storage system can recharge itself for use during peak times or power outages. In addition to being used as an emergency power source, home energy storage systems can also save on household electricity bills by balancing the power load.
- LiFePO4 battery (LFP battery)
- 100A
- 469*440*133mm
- 100Ah
- Information
| General Parameters | Remark |
| Lithium Battery | |
| LiFePO4 | |
| 48V | 15S1P |
| 45~54V | Operating Voltage Range |
| 54.75V | |
| 100Ah/48V (4.8KWh) | At 25℃,0.2C Discharging |
| ≤80mΩ | at 20±5°C ambient temperature, use an AC internal resistance tester with frequency of 1kHz for measuring after being fully charged. |
| 54V±0.5V | |
| 10A | |
| 100A | Allows charging with maximum charging current |
| 80mA | |
| 0℃~45℃ | |
| 54.75V±0.5V | |
| 37.5V±0.5V | Load voltage when the battery pack stops discharging (voltage value at which discharging reaches discharge cut-off voltage) |
| 100A | Allows charge with maximum discharge current |
| Supported in parallel, not in series | Up to 16 batteries can be connected in parallel |
| Same Interface | |
| 469*440*133mm | |
| 39Kg | |
| Sheet metal + plastic spraying | |
| 0~25℃ |
